Descripción
Tekbox TBST Shielded Tents
The Tekbox TBST line of shielded tents is designed to suppress interference from ambient noise when carrying out EMC pre-compliance measurements with sizes of 200 cm x 100 cm x 100 cm, 124 cm x 64 cm x 60 cm or 86 cm x 48 cm x 48 cm. The 200 cm and 124 cm tent can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells. The 86 cm tent will fit the TBTC0/1/2 and all our LISN.
The Tekbox TBST shielded tents are composed of two layers of conductive fabrics. It is supported by rigid aluminium profiles. The filter panel at the side provides a 240V/10A mains AC filter (optional for the smaller tent), two general purpose 240V/10A AC/DC filters and four coaxial feed through adapters with screw caps. The access opening is sealed with conductive Velcro tape.
TBST-120/60/60/2-B; -86/49/45/1-B; -86/49/45/2-B
- Outer dimensions: 124 cm x 64 cm x 60 cm (86 cm x 48 cm x 48 cm).
- Opening dimensions: 85 cm x 35 cm (40 cm x 22 cm).
- Frame: 20 mm x 20mm extruded aluminium profiles.
- Shielding: 2 layers of conductive fabrics.
- Seal: conductive Velcro tape.
- Suspension: Velcro stripes.
- Filter panel: 1 x 240V/10A AC filter; IEC socket (optional for the smaller tent)
2 x 240V/10A DC filter; cables with female Banana couplers
3 x N- female feed through connector with screw caps
1 x BNC-female feed through connector - Internal AC Socket: pigtail cable with detachable female Schuko
- Attenuation: ~50…70 dB in the range DC to 6 GHz.
- Weight: 10.8 kg.
TBST-200/100/100
- Outer dimensions: 204 cm x 104 cm x 100 cm
- Opening dimensions: 130 cm x 46 cm
- Frame: 20 mm x 20mm extruded aluminium profiles
- Shielding: 2 layers of conductive fabrics
- Suspension: Velcro stripes
- Filter panel: 1 x 240V/10A AC filter; C19 socket
2 x 240V / 10 A AC/DC filters, attached cables with Banana couplers
3 x N-Female coaxial feed-through connectors with screw caps
1 x BNC-Female coaxial feed-through connector with screw caps - Internal AC Socket: pigtail cable with detachable female Schuko + country specific AC cables with C13 connector
- Attenuation: ~50 dB in the range 10 MHz to 6 GHz, see chapter 3
- Weight: 17kg + 3kg (packaging)
