Descripción
HIOKI PW3390 Power Analyzer
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The Hioki PW3390 is a high-precision, broad-range power analyzer for measuring electrical power from DC to inverter frequencies, providing four input channels to support single- and three-phase inverter motor systems up to 4000 A AC/DC with superior accuracy.
High-accuracy, high-speed calculation of transient-state power in 50 ms; harmonic analysis; display of instantaneous waveforms; noise analysis; and simultaneous parallel calculation of all parameters, including efficiency loss
Delivering High Accuracy and Mobility in One Single Device
The Hioki PW3390 Power Analyzer offers ±0.04％ ±0.05％ f.s. power accuracy, the top of its class. With a 200kHz measurement bandwidth and flat amplitude and phase characteristics up to high frequencies, as well as a powerful phase shift correction function that maximizes the power of its original current sensors, the Hioki PW3390 can now be utilized by researchers and developers to high frequency, low power factor power with absolutely accuracy. Apply the Hioki PW3390 and Hioki current sensors to power conversion efficiency evaluations and the analysis and harmonic studies of EV and HEV inverter motors.
Características principales:
- ±0.04% basic power accuracy, among the best in its class.
- 00 kHz measurement band with flat amplitude and phase accuracy that extend to high frequencies.
- Remarkably small and light footprint, enabling high-accuracy measurement to be easily carried out even in the field.
- Send measured values to Hioki data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products).
- Simultaneous measurement of multiple circuits and ability to acquire synchronized data using up to 8 devices (for 32 channels).
- Simple power measurement using clamp-on current sensors.
- Measurement of current and power inputs and outputs as part of the new WLTP fuel efficiency international standard.
- Model PW3390-02 with D/A output.
- Model PW3390-03 with D/A output and motor analysis.
Ficha del producto
Especificaciones:
- Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel.
- Measurement items: Frequency, RMS voltage, voltage mean value rectification RMS equivalent, voltage AC component, voltage simple average, voltage fundamental wave component, voltage waveform peak +, voltage waveform peak -, voltage total harmonic distortion, voltage ripple factor, voltage unbalance factor, RMS current, current mean value rectification RMS equivalent, current AC component, current simple average, current fundamental wave component, current waveform peak +, current waveform peak -, current total harmonic distortion, current ripple factor, current unbalance factor, active power, apparent power, reactive power, power factor, voltage phase angle current phase angle, power phase angle, positive-direction current magnitude, negative-direction current magnitude, sum of positive- and negative-direction current magnitude, positive-direction power magnitude, negative-direction power magnitude, sum of positive- and negative-direction power magnitude, efficiency, loss. Current integration, active power integration.
- PW3390-03 only: Torque, Rotation, Frequency, Slip, or Motor power.
- Harmonic measurement: Input: 4 ch, Synchronization frequency range: 0.5 Hz to 5 kHz.
Number of harmonic orders: Max. 100th order - Noise measurement: Number of channels: 1 ch (select one channel from CH1 to CH4),
Maximum analysis frequency: 200 k/ 50 k/ 20 k/ 10 k/ 5 k/ 2 kHz. - Motor Analysis (PW3390-03 only): Input: 3 ch (CH A, CH B, CH Z), Measurement parameters: Voltage, torque, rotation rate, frequency, slip, and motor power.
- Measurement range: Voltage range: 15 to 1500 V, 7 ranges
Current range: 0.1 A to 20 kA (depends on current sensor). - Effective measuring power range: 0.0150 W to 39.600 MW (determined automatically by the combination of voltage range, current range, and measurement line).
- Basic accuracy (45 to 66 Hz):
- Voltage: ±0.04 % rdg. ±0.05 % f.s.
- Current: ±0.04 % rdg. ±0.05 % f.s.
- Active power: ±0.04 % rdg. ±0.05 % f.s..
- Synchronization frequency range: 0.5 Hz to 5 kHz.
- Frequency band: DC, 0.5 Hz to 200 kHz.
- Data update rate: 50 ms (For harmonic/frequency measurement, depends on the synchronization frequency when less than 45 Hz).
- Display refresh rate: 200 ms (Independent of internal data update rate; waveform and FFT depend on the screen).
- Auto-Save Functions: Each value is stored to CF card during every measurement interval (not available for USB storage), OFF, 50 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes, 15 settings.
- External interfaces: LAN, USB (for communication/ memory), RS-232C (for communication/LR8410 link), CF card, Synchronization control, External Control.
- Logger connectivity: Sends measured values wirelessly to logger by using a BluetoothⓇ wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers).
- Power supply: 100 to 240 V AC, 50/60 Hz, 140 VA max.
- Dimensions and mass; 340 mm (13.39 in)W × 170 mm (6.69 in)H × 156 mm (6.14 in)D, 4.6 kg (162.3 oz).
- Included accessories: Instruction Manual ×1, Power cord ×1, Measurement Guide ×1, USB cable ×1, Input cord label ×2, D-sub connector × 1 (PW3390-02, PW3390-03).
