Descripción
Testec TT-SI 9001
Testec TT-SI 9001 Sonda Activa diferencial DC a 25MHz, x10/x100, ±70V/±700V, precisión ±2%.
Solo conectar a equipos con tierra!!
Características principales:
- Bandwidth; DC to 25 MHz (-3dB).
- Attenuation Ratio; x10 / x100.
- DC-Accuracy: ±2 %.
- Input Impedance: 4 MΩ, 5.5 pF.
- Rise Time: 14 ns.
- Measurement Category: CAT III.
- Max. Amplitude: ±7 V (into 2 kΩ load).
- Offset: <±5 mV.
- Noise (typical): 0.7 mVrms.
- Source Impedance (typical): 50 Ω (for using 1 MΩ input system oscilloscope).
- CMRR (typical): -86 dB @ 50 Hz, -66 dB @ 20 kHz.
- Input Voltage: Differential Mode: x10 ±70 V (DC + peak AC) or 70 Vrms, x100 ±700 V (DC + peak AC) or 700 Vrms.
- Input Voltage Common Mode: x10 ±700 V (DC + peak AC) or 700 Vrms, x100 ±700 V (DC + peak AC) or 700 Vrms.
- Input Voltage Absolute max. Voltage: x10 ±1400 V (DC + peak AC) or 1000 Vrms., x100 ±1400 V (DC + peak AC)
or 1000 Vrms. - Power requirements: 4x AA Cells or Mains Adaptor 6 VDC / 60 mA or regulated 9 VDC / 40 mA.
- Dimensions (L x W x H): 170 mm x 63 mm x 21 mm.
- Cable: BNC Cable 95 cm.
- Input Leads 45 cm.
- Weight: 400 g (Probe and PVC-Jacket included)
